2 story prefab building is a kind of light steel H section steel, channel steel as the skeleton, with sandwich board as the wall board material, with the standard module series space combination, component bolt connection or welding, a new concept of environmental and economic housing. It can be easily and quickly assembled and disassembled, realizing the general standardization of temporary buildings, setting up the building concept of environmental protection, energy saving, fast and efficient, and making temporary houses enter the field of serial development, integrated production, matching supply, inventory and multiple turnover of the final products.
2 Story Prefab Building Maintenance method:
1. After installation of K-home activity room, the user shall not change the structure without authorization, and shall not remove any bolt components, nor increase or decrease the partition.
2. The light steel members should be painted and maintained once every 1-2 years to extend the life of products and keep them beautiful.
3. K-home prefab building is connected with the whole building with steel structural parts, users arrange electric lighting equipment, the wires can not be directly tied on the steel structure, should be installed with wire pipe or groove isolation, so as to avoid electric shock.
4 all the use of screws connected to the light steel structure K-home prefab building, which is equipped with commonly used power sockets and other facilities, bright line source do not install or hang on the K-home steel frame, should design square plastic line pipe or line slot insulation separate laid, to prevent the occurrence of leakage electric shock and other cases.
5. K-home prefab building in production after the installation is complete, non-professional personnel don't modify the housing structure or circuit design, building construction can't tear down screws or steel fittings and so on, more can't remove the K-home sandwich board partition or increase the other partition, strongly to increase or decrease of partition, should inform us arrange professional solution for you.
6 after leaving the room must turn off all the power, in case of accidents, when the use of gas stove stove color steel room can not be too close to the source of the fire, also can not use high-power electrical equipment.
7 K-home prefab building frame in the normal circumstances should be 12 to 24 months between spraying paint once or more, so can prevent the rust of the steel frame, also can make K-home house beautiful eye candy!