How to Install one Layer T-type House

- Oct 12, 2019-

Instruction of Installation T-type House
1. Making 15mm-30mm thick foundation with cement. Measure the size, then
put the 75mm galvanized steel groove and 50 White Groove by expansion
screw according to CAD drawing.

(Attention: Must keep the bottom steel frame horizontal and the column vertical)

1

微信图片_20191012085546

22. Install all the column and beam according to CAD drawing.
Attention: (Must keep the steel frame horizontal and the column vertical to make

sure the house stable enough.

4

5

3. Install the Inner Ridge

6

44. Install the 75mm outdoor and 50mm indoor wall Aand roof panel.
(Attention: First, The side gable panel needs to be cut obliquely, and the symmetry

and slope of the double-sided gable panel must be guaranteed.

acm5

6. Install the Ceiling Tile.
(Attentions: Before install the Ceiling Tile, Ceiling Square Tube should be
installed on Herringbone Beam. Then the ceiling tile connect with Ceiling Square

Tube)

7

7. Install all the windows (Plastic Steel windows and Shutters of toilet) and doors.

8

9

10